10. Part 1 – Step 5: Use Glue and stick the compartments to the bottom of the side box
You are applying the wood glue to the divider. Next, you need to position the division against the bottom side of the case. You will utilize a clamp to assist in holding the bits together. Along with the wood glue, you use three screws to tie the pieces together.
The easiest way to mount the screws in the plywood is to drill a countersunk pilot hole and then hold the screw 1 inch from the front edge panel. To ensure that the dividers are 90 degrees to the front rim, using a framing square. You will do this procedure again for all the dividers you possess.
